Technical data · Document CP-DS-ZN-001 Rev. A
Cast Zinc Anode Sizes and Designations
Email: sales@cathprocp.com · WhatsApp +86 159 7878 1890
Internationally recognized standard marine zinc anode forms defined by MIL-DTL-18001L and ASTM F1182 (ZHS, ZHC, ZHB, ZSS, ZTS, ZEP Styles A/B/C, ZBP and ZBS), plus ASTM B418 Type I (UNS Z32120) and cadmium-free Type II (UNS Z13000) alloy chemistry, DNV-RP-B401 Annex B / ISO 9351:2025 electrochemical parameters and custom ballast-tank, harbour and bracelet castings.
Ship hulls, rudders & sea chests
Hull slabs — Type ZHS, ZHC and ZHB
| Designation | Body Dimensions (mm) | Min. Weight | Core / Mounting Insert |
|---|---|---|---|
| ZHS-23 | 152 × 305 × 32 | 9.7 kg | Projecting steel straps (weld-on or drilled) |
| ZHS-42 | 152 × 305 × 64 | 18.6 kg | Projecting steel straps (weld-on or drilled) |
| ZHC-23 | 152 × 305 × 32 | 9.3 kg | Core straps; countersink for neoprene washer available |
| ZHC-42 | 152 × 305 × 64 | 17.7 kg | Core straps (bolt-on hull / sea chest) |
| ZHB-23 | 152 × 305 × 32 | 9.7 kg | Brass or phosphor-bronze straps, zinc-coated |
Low-drag & compact hull positions
Submarine slabs and teardrop — Type ZSS and ZTS
| Designation | Form | Min. Weight | Core / Mounting Insert |
|---|---|---|---|
| ZSS-12 | Submarine slab | 5.0 kg | Steel strap; weld-on or fastener-mounted |
| ZSS-24 | Submarine slab | 9.8 kg | Steel strap; weld-on or fastener-mounted |
| ZTS | Streamlined teardrop | 2.3 kg | Steel strap |
Condensers, heat exchangers & water boxes
Discs and fairwater slabs — Type ZEP (pipe core / pipe bushing core)
| Designation / Style | Dimensions (mm) | Min. Weight | Typical Duty & Notes |
|---|---|---|---|
| ZEP Style A | Square slab, 25 mm thick | 4.1 kg | Pipe core / bushing; condenser & water-box internals |
| ZEP Style B (Ø51) | Ø51 × 25 | 0.35 kg | Circular disc; threaded-boss & bolt-through variants to drawing |
| ZEP Style B (Ø76) | Ø76 × 25 | 0.81 kg | Circular disc; water boxes & strainers |
| ZEP Style B (Ø102) | Ø102 × 25 | 1.45 kg | Circular disc; heat-exchanger end covers |
| ZEP Style B (Ø127) | Ø127 × 25 | 2.2 kg | Circular disc; condenser & distiller boxes |
| ZEP Style B (Ø152) | Ø152 × 25 | 3.3 kg | Circular disc; seawater cooling internals |
| ZEP Style B (Ø229) | Ø229 × 25 | 7.3 kg | Circular disc; large water boxes & pump sumps |
| ZEP Style B (Ø279) | Ø279 × 25 | 10.9 kg | Circular disc; power & desalination intakes |
| ZEP Style C | Semi-circular slab | 10.5 kg | Partitioned condenser water boxes |
Bars & drawing-controlled project castings
Type ZBP / ZBS bars, ballast tank blocks and subsea bracelets
| Designation | Form | Min. Weight | Core / Mounting Insert |
|---|---|---|---|
| ZBP | Bar anode | 3.6 kg | Pipe core (ASTM A524 / BS EN 10305-1) |
| ZBS | Bar anode | 3.9 kg | Steel straps (ASTM A36 / BS EN 10025-1) |
Drawing-based tank, harbour and bracelet castings: Ballast and cargo tank zinc blocks on straight or cranked (Z-bend) steel inserts carry zero spark-energy restriction in gas-hazardous spaces. Harbour slender stand-off zinc anodes and submarine pipeline half-shell bracelets are cast to approved drawings with EN 10204 3.1 insert traceability.
Alloy & electrochemical data
ASTM B418 Type I vs cadmium-free Type II & electrochemical acceptance
Both alloy routes are cast from special-high-grade zinc with certified spark-OES heat analysis. Operating temperature should be stated at enquiry: above ~50 °C, intergranular corrosion risk requires an aluminum-family or specifically validated high-temperature route.
| Element (mass %) | ASTM B418 Type I (UNS Z32120) | ASTM B418 Type II (UNS Z13000, Cd-Free) | Control Purpose |
|---|---|---|---|
| Aluminum (Al) | 0.10 – 0.50 | ≤ 0.005 | Active dissolution with Cd in Type I |
| Cadmium (Cd) | 0.025 – 0.070 | ≤ 0.003 | Type I activator; excluded in Type II environmental route |
| Iron (Fe) | ≤ 0.005 | ≤ 0.0014 | Strictly capped (50 ppm / 14 ppm) to prevent self-corrosion & passivation |
| Lead (Pb) | ≤ 0.006 | ≤ 0.003 | Impurity control |
| Copper (Cu) | ≤ 0.005 | ≤ 0.002 | Impurity control |
| Others (total) | ≤ 0.10 | — | ASTM B418-16a(2021) table limit |
| Zinc (Zn) | Remainder | Remainder | Nominal alloy density 7.14 g/cm³ |
| Electrochemical Property | Value | Standard / Test Basis |
|---|---|---|
| Electrochemical capacity | ≥ 780 Ah/kg (~95% efficiency) | DNV-RP-B401 Annex B, AMPP/NACE TM0190 or ISO 9351:2025 |
| Closed-circuit potential | −1.00 V or more negative | vs Ag/AgCl/seawater at end of 4th test period |
| Open-circuit potential | ≈ −1.05 V | vs Ag/AgCl/seawater |
| Consumption rate | ≤ 11.2 kg / A·yr | 8,760 h/yr ÷ 780 Ah/kg |
| Driving voltage to protected steel | 0.20 V nominal | Against −0.80 V vs Ag/AgCl criterion (zero coating overprotection risk) |
Buyer questions
Frequently asked questions
What are the dimensions and minimum weights of ZHS-23 and ZHS-42 zinc hull anodes?
Per MIL-DTL-18001L and ASTM F1182, ZHS-23 measures 152 × 305 × 32 mm with a minimum weight of 9.7 kg on projecting steel straps. ZHS-42 measures 152 × 305 × 64 mm with a minimum weight of 18.6 kg on steel straps.
When should ASTM B418 Type II be specified instead of Type I?
ASTM B418 Type I (UNS Z32120) uses controlled Al (0.10–0.50%) and Cd (0.025–0.070%) for classic seawater service. ASTM B418 Type II (UNS Z13000) is an ultra-high-purity cadmium-free zinc alloy (Cd ≤ 0.003%, Fe ≤ 0.0014%) specified where environmental rules exclude cadmium or for specific soil/brackish duties.
What temperature limit applies to cast zinc sacrificial anodes?
Standard electrochemical data (≥ 780 Ah/kg, −1.00 V vs Ag/AgCl/seawater) apply to ambient-temperature immersion. As operating temperature approaches or exceeds approximately 50 °C, zinc becomes susceptible to intergranular corrosion and potential shift; hot risers or heated tanks require an aluminum-family or specifically validated route.
Are ballast tank blocks and submarine pipeline zinc bracelets available to custom drawings?
Yes. Alongside standard ZHS, ZHC, ZHB, ZSS, ZTS, ZEP, ZBP and ZBS forms, CathPro casts tank blocks on straight or cranked inserts (with zero spark-energy restriction in gas-hazardous cargo/ballast spaces), harbour stand-off anodes and half-shell pipeline bracelets to buyer drawings.