Technical data · Document CP-DS-AL-001 Rev. B
Aluminum Anode Sizes and Specifications
Email: sales@cathprocp.com · WhatsApp +86 159 7878 1890
Complete standard size tables from CathPro Data Sheet CP-DS-AL-001 Rev. B covering 59 cast Al-Zn-In models across offshore stand-off, ballast tank flush-mounted, ship hull, heat-exchanger disc, seawater cooling and submarine pipeline bracelet series. Every line states both net alloy mass (for CP life calculation) and gross mass including steel insert (for lifting and freight), alongside DNV-RP-B401 (May 2021) Table 8-5 chemistry and Section 9 electrochemical acceptance.
Tubular stand-off
Slender stand-off — tubular insert (offshore jackets, wind foundations, subsea templates)
| Model | Anode Body L × (Top+Bottom) × H (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AS-311 | 2300 × (220+240) × 230 | 311.0 | 336.5 |
| CP-AS-183 | 1600 × (200+210) × 220 | 182.6 | 202.5 |
| CP-AS-170 | 1600 × (200+210) × 205 | 169.5 | 190.0 |
| CP-AS-127 | 1500 × (170+200) × 180 | 127.0 | 142.2 |
| CP-AS-59 | 900 × (150+170) × 160 | 59.1 | 67.2 |
Bar stand-off
Slender stand-off — bar or flat-steel insert (harbour piling, jetties, sheet piling)
| Model | Anode Body L × (Top+Bottom) × H (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AS-114 | 1500 × (148+178) × 170 | 114.0 | 121.0 |
| CP-AS-80 | 850 × (180+220) × 180 | 80.0 | 84.5 |
| CP-AS-76 | 800 × (200+280) × 150 | 76.0 | 80.0 |
| CP-AS-68 | 700 × (160+220) × 180 | 68.5 | 72.0 |
| CP-AS-52 | 1250 × (115+135) × 130 | 52.0 | 55.0 |
| CP-AS-43 | 1000 × (115+135) × 130 | 42.6 | 45.0 |
| CP-AS-33 | 750 × (115+135) × 130 | 33.0 | 35.0 |
| CP-AS-22 | 500 × (115+135) × 130 | 22.0 | 23.0 |
Tank flush-mounted
Flush-mounted — ballast tanks, cargo tanks and internal compartments
| Model | Anode Body L × (Top+Bottom) × H (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AF-21 | 500 × (115+135) × 130 | 20.5 | 23.0 |
| CP-AF-20 | 1500 × (65+75) × 70 | 19.8 | 21.5 |
| CP-AF-18 | 500 × (110+130) × 120 | 18.0 | 20.0 |
| CP-AF-12 | 1000 × (58.5+78.5) × 68 | 12.0 | 13.2 |
| CP-AF-9 | 800 × (56+74) × 65 | 9.0 | 10.0 |
| CP-AF-8 | 1150 × (48+54) × 51 | 7.6 | 9.0 |
| CP-AF-5 | 250 × (85+100) × 85 | 4.8 | 5.0 |
| CP-AF-3 | 200 × (70+90) × 70 | 2.8 | 3.0 |
Ship hull
Hull type — external ship hulls, rudders and sea chests (weld-on or bolt-on)
| Model | Anode Body L × W × H (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AH-15 | 800 × 140 × 60 | 15.4 | 17.0 |
| CP-AH-13 | 800 × 140 × 50 | 13.4 | 15.0 |
| CP-AH-11 | 800 × 140 × 40 | 10.5 | 12.0 |
| CP-AH-9 | 600 × 120 × 50 | 9.0 | 10.0 |
| CP-AH-6 | 400 × 100 × 50 | 5.8 | 6.5 |
| CP-AH-5 | 500 × 100 × 40 | 4.6 | 5.5 |
| CP-AH-4 | 400 × 100 × 40 | 4.1 | 4.5 |
| CP-AH-3 | 300 × 100 × 40 | 3.2 | 3.5 |
| CP-AH-2 | 250 × 100 × 40 | 2.2 | 2.5 |
| CP-AH-1 | 180 × 70 × 35 | 1.0 | 1.2 |
Disc anodes
Disc type — heat-exchanger water boxes and confined cooling-water spaces
| Model | Anode Body Diameter × Thickness (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AD-11 | Ø300 × 60 | 11.3 | 11.5 |
| CP-AD-9 | Ø360 × 40 | 8.8 | 9.0 |
| CP-AD-7 | Ø300 × 40 | 7.3 | 7.5 |
| CP-AD-4 | Ø200 × 50 | 3.8 | 4.0 |
| CP-AD-3 | Ø180 × 50 | 3.3 | 3.5 |
| CP-AD-2 | Ø120 × 100 | 2.3 | 2.5 |
Seawater cooling
Seawater cooling — intake caissons, pump sumps, strainers and desalination systems
| Model | Anode Body L × (Top+Bottom) × H (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AE-112 | 1200 × (200+280) × 150 | 112.0 | 120.0 |
| CP-AE-76 | 800 × (200+280) × 150 | 76.2 | 80.0 |
| CP-AE-43 | 1000 × (115+135) × 130 | 43.2 | 46.0 |
| CP-AE-22 | 500 × (115+135) × 130 | 21.5 | 23.0 |
| CP-AE-19 | 1000 × (80+100) × 80 | 19.0 | 20.0 |
| CP-AE-15 | 500 × (105+135) × 100 | 15.2 | 16.0 |
| CP-AE-9 | 500 × (80+100) × 80 | 9.4 | 10.0 |
| CP-AE-6 | 400 × (110+120) × 50 | 6.4 | 7.0 |
| CP-AE-5 | 300 × (140+160) × 40 | 4.5 | 5.0 |
| CP-AE-3 | 200 × (90+110) × 40 | 2.8 | 3.0 |
Pipeline bracelet
Submarine pipeline bracelet — half-shell pairs (see dedicated bracelet page for full pipe-coating details)
| Model | OD × Width × Thickness × Gap (mm) | Net Mass (kg) | Gross Mass (kg) |
|---|---|---|---|
| CP-AB-527 | 1034 × 516 × 115 × 120 | 527.3 | 562.8 |
| CP-AB-283 | 1034 × 520 × 65 × 120 | 283.0 | 311.9 |
| CP-AB-191 | 1034 × 516 × 40 × 120 | 191.0 | 209.0 |
| CP-AB-190 | 569 × 500 × 76 × 80 | 190.5 | 200.5 |
| CP-AB-138 | 569 × 500 × 57 × 80 | 137.5 | 147.5 |
| CP-AB-88 | 569 × 500 × 38 × 80 | 87.6 | 97.5 |
| CP-AB-80 | 518 × 500 × 38 × 80 | 79.5 | 88.5 |
| CP-AB-64 | 467 × 450 × 38 × 80 | 64.1 | 72.5 |
| CP-AB-50 | 416 × 400 × 38 × 80 | 50.3 | 57.9 |
| CP-AB-48 | 374 × 480 × 34 × 80 | 47.9 | 55.0 |
| CP-AB-41 | 342 × 450 × 34 × 80 | 40.8 | 47.3 |
| CP-AB-31 | 290 × 400 × 35 × 80 | 31.4 | 36.5 |
Alloy & electrochemical data
DNV-RP-B401 (May 2021) Table 8-5 composition & Section 9 performance
Cadmium-free Al-Zn-In alloy. Certified spark-OES heat analysis and EN 10204 3.1 steel insert certificates ship per order scope. CathPro HYAL material holds DNV Type Approval TAS0000505 (material scope, valid through 18 Sep 2030).
| Electrochemical Property | Value | Standard / Test Basis |
|---|---|---|
| Electrochemical capacity | ≥ 2,500 Ah/kg | DNV-RP-B401 (May 2021) §5.6.7, tested to Section 9 (or AMPP/NACE TM0190 when specified) |
| Current efficiency | ≥ 85% | Relative to theoretical Al ceiling of 2,980 Ah/kg |
| Closed-circuit potential | −1.05 V or more negative | End of 4th test period vs Ag/AgCl/seawater |
| Open-circuit potential | −1.10 to −1.15 V | vs Ag/AgCl/seawater |
| Consumption rate | ≤ 3.50 kg / A·yr | 8,760 h/yr ÷ 2,500 Ah/kg |
| Nominal alloy density | 2.70 g/cm³ | Cast Al-Zn-In alloy |
| Element | Limit (mass %) | Metallurgical Role |
|---|---|---|
| Zinc (Zn) | 2.50 – 5.75 | Shifts operating potential and suppresses self-corrosion |
| Indium (In) | 0.015 – 0.040 | Depassivating activator in chloride-bearing water |
| Iron (Fe) | ≤ 0.09 | Controlled impurity to minimize cathodic intermetallics |
| Copper (Cu) | ≤ 0.003 | Controlled impurity |
| Silicon (Si) | ≤ 0.12 | Controlled to limit iron intermetallic effect |
| Cadmium (Cd) | ≤ 0.002 | Not added (cadmium-free alloy) |
| Aluminum (Al) | Remainder | Galvanic matrix |
Buyer questions
Frequently asked questions
What is the difference between net mass and gross mass in aluminum anode tables?
Net mass is the Al-Zn-In sacrificial alloy mass only and governs ampere-hour calculations and CP design life. Gross mass includes the cast-in steel tubular, flat-bar or strap insert and governs packing lists, lifting and freight.
What chemical composition limits apply to CathPro Al-Zn-In anodes?
Per DNV-RP-B401 (May 2021) Table 8-5: Zn 2.50–5.75%, In 0.015–0.040%, Fe ≤ 0.09%, Cu ≤ 0.003%, Si ≤ 0.12%, Cd ≤ 0.002% (cadmium-free), Al remainder. Every heat is verified by certified spark-OES analysis.
What electrochemical capacity is guaranteed under DNV-RP-B401 quality-control testing?
Under DNV-RP-B401 (May 2021) §5.6.7 tested to Section 9, electrochemical capacity is ≥ 2,500 Ah/kg (≤ 3.50 kg/A·yr consumption rate, ≥ 85% efficiency) with a closed-circuit potential of −1.05 V or more negative vs Ag/AgCl/seawater at the end of the fourth test period.
Can CathPro cast offshore or hull aluminum anodes outside the 59 standard models?
Yes. The 59 CP-AS, CP-AF, CP-AH, CP-AD, CP-AE and CP-AB codes represent standing factory patterns. Custom stand-off bodies, cranked inserts, doubler plates and pipeline bracelets are cast routinely to approved buyer drawings.