Common Applications
- Pipeline AC mitigation and grounding
- Tank bottom and ringwall cathodic protection
- Casing protection and localized CP design
- Grounding grids and corrosion control upgrades
Standards and Inspection
- ASTM B418 Type I or Type II can be discussed by order requirement
- SHG zinc based production with composition checks by agreed inspection plan
- COA, MTC, dimensional report, packing list and export documents on request
- Project specification, drawings and MTO should be confirmed before quotation
RFQ Information Needed
- Ribbon size, coil length, and total quantity
- Application and installation condition
- Required standard and inspection documents
- Destination port and packing requirement
Installation and Selection Notes
Zinc ribbon anode buyers often compare installation method, ribbon size, coil length, backfill condition, and connection practice before issuing an RFQ. Send your project specification or MTO if you need quotation support.
- Common search terms: zinc ribbon anode installation, AC mitigation zinc ribbon, grounding mat zinc ribbon, pipeline casing protection.
- Typical installation discussions: direct burial, trenching, grounding grid layout, casing area, tank bottom or ringwall area, and project-specific electrical continuity.
- For AC mitigation or high-resistivity environments, confirm soil condition, prepared backfill requirement, current demand, and expected service life with the project engineer.
Specification Checklist for RFQ
To reduce back-and-forth, include the following details when requesting a quotation:
- ASTM B418 Type I / Type II or project-specific chemical composition requirement
- Ribbon cross section, total length, coil length, and quantity
- Application: pipeline CP, AC mitigation, grounding grid, casing protection, or tank bottom CP
- Packing method, destination port, inspection documents, and certificate requirements
Zinc Ribbon Anode Reference Sizes
| Nominal Ribbon Size | Typical Coil / Weight Reference | Buyer Should Confirm |
|---|---|---|
| 25.40 x 31.75 mm (1" x 1-1/4") | 30.5 m / 100 ft per coil, about 3.570 kg/m (2.40 lbs/ft) | Required standard, coil handling, pallet and total project quantity |
| 15.88 x 22.22 mm (5/8" x 7/8") | 61 m / 200 ft per coil, about 1.785 kg/m (1.20 lbs/ft) | Destination port, seaworthy packing, label and document requirement |
| 12.70 x 14.28 mm (1/2" x 9/16") | 152.5 m / 500 ft per coil, about 0.893 kg/m (0.60 lbs/ft) | Application: AC mitigation, pipeline CP, grounding grid or tank bottom CP |
| 8.73 x 10.32 mm (11/32" x 13/32") | 305 m / 1000 ft per coil, about 0.372 kg/m (0.25 lbs/ft) | Inspection documents: COA, MTC, dimensional report or certificate of origin |
Reference values are nominal. Final quotation should follow the order specification, agreed standard, packing plan and inspection document requirements.
Downloads
Use these documents for preliminary product review and RFQ preparation. Final details should be confirmed in the quotation.
Send RFQ directly
Request a Zinc Ribbon Anode Quotation
Send size, coil length, quantity, standard, packing requirement, destination port, and project specification. CathPro will reply with quotation information and available documentation.
- Use this form for ASTM B418 zinc ribbon anode RFQ, not general boat zinc anodes.
- Datasheet, packing information, COA, MTC and dimensional report can be discussed before order.
- For drawings, MTO or project specifications, upload a small file or email large files after submitting.
Request a Zinc Ribbon Anode Quotation
Send size, coil length, quantity, standard, packing requirement, destination port, and project specification. CathPro will reply with quotation information and available documentation.